A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off a blend of a ’59 Fender Bassman RI and a handwired Marshall 1974x amplifier. The bundle is a set of captures based off my favorite settings on the amps meticulously captured through cabinets loaded with a 12” Celestion G12M-20 Heritage Aged Greenback (Marshall 1974x) and a 4x10 loaded Jensen P10R speakers cab (Fender Bassman).

This bundles tone models model an array of different gain and channel settings. The bundle includes 5 blended amp/cab tone models (amp > mic > mic pre) all at various gain levels and settings through the previously mentioned speaker. The naming convention for the tone presets are, for example, as follows:

JS – B-Man 74x Ult xxxx x

The xxxx signifies the overall level of gain in the tone model from Clean to Push. The single “x” signifies the level of gain within the previous mentioned overall level of gain.

1. Clean – Amp set to as clean to edge of breakup tone depending on the guitar used.
2. Push 1 – This is a pushed to breakup amp tone.
3. Push 2 – This is a tone model in the same ball park gain wise as Push 1 but voiced quite different.
4. Push 3 – This is a higher gain tone in comparison to Push 1 & 2.
5. Push 4 – This is a higher gain tone in comparison to Push 3.

The tone models were recorded with both a Royer Labs R10 ribbon mic and a Beyer Dynamic M160 ribbon mic.

Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.