A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off a Marshall SV20C Studio Vintage Plexi tube amplifier. This bundle is a set of captures based off my favorite settings on the amp meticulously captured DIRECT with no speaker cabs so the end user can more accurately apply a speaker cab or IR of their choice. To get you started, the preset included with these tone models include a custom IR of a meticulously captured 2x12 cab loaded with Vintage 30’s with a Cascade Fathead ribbon mic through NEVE style mic pres.
 
This bundles tone models model an array of different gain settings. The bundle includes 9 tone models all at various gain levels and setting. The naming convention for the tone presets are, for example, as follows:
 
JS – Plexi DI Ult xxxx (High, Nrm or Jump)
 
The “High”, “Nrm” & “Jump” represents which amplifier input was used with Jump being the “High” and “Low” jumped together. The “xxxx” in the above naming convention represents the following tone models:
 
Push 1 – Amp set to as clean as it can be but can still be on the edge of breakup depending in the guitar used.
Push 2 – This is a pushed to breakup amp tone.
Push 3 – This is a higher gain tone model in comparison to Push 2. Often this was captured with the amps volume maxed out on 10.
 
Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.