A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off an Orange OR30 amplifier. 
 
The bundle is a set of captures based off my favorite settings on the amp meticulously captured with no cab (direct).
 
This bundles tones model an array of different gain and channel settings. The bundle includes 11 amp only/direct tone models (amp > mic > mic pre) all at various gain and tonal settings. The tone model PRESETS also include a custom “baked in” impulse response of a 2x12 Revv G12H-75 Creamback loaded speaker cab mic’ed with a Royer R10 ribbon mic. To access the DI tone model alone, simply bypass the cab and you will have the raw tone model as it was captured direct.
 
The naming convention for the tone model presets are, for example, as follows:
 
JS – OH-Argh 30 DI “xxxx” “x” (N/B1/B2)
 
The “xxxx” signifies the overall level of gain in the tone model from Clean to Push to OD. The single “x” signifies the level of gain within the previously mentioned overall level of gain. If the name contains an “N” it was captured with the bright switch in the middle or neutral position. If the name contains “B1” it was captured with the bright switch set to the left position which is the middle level of brightness. If the name contains “B2” it was captured with the bright switch set to the right position which is the highest level of brightness. 
 
Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.