A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off a Morgan Dual 20 tube amplifier. This bundle is a set of captures based off my favorite settings on the amp meticulously captured DIRECT without a speaker cab or microphone. This allows the end user to get a very accurate representation of the amp and the ability to add whatever speaker or impulse response suits them. To get you started this tone model bundle also includes two custom impulse responses. The first IR is of a 1x12 Celestion Custom 90 speaker, and the second IR is a Celestion G12-T-75 speaker. These two speakers have very different yet complimentary sounds and when combined with the Voxy 20 Direct captures give a world of tonal possibilities.
 
This bundles tone models model an array of different gain settings. The bundle includes 9 direct tone all at various gain levels and settings. The bundle also includes 18 presets based on these 9 tone models paired up with each of the previous mentioned speaker IRs. The naming convention for the tone presets are, for example, as follows:
 
JS – Voxy 20 DI x (N or T or N-EF86)
 
The “N” signifies the “normal” channel of the amp, the “T” signifies the Top Boost channel and the “N-EF86” signifies the “Normal” channel using the EF86 preamp tube instead of the default 12AX7 for a higher gain sound. If there is a “75” after the name, this signifies the tone model is paired with the included G12-T-75 speaker IR and when no number is shown it is paired with the Celestion Custom 90 speaker IR. The “x” in the above naming convention represents the following tone models:
 
1 – Amp set to as clean as it can be.
2 – This is a pushed to breakup amp tone depending on the guitar used. It can also stay quite clean with single coil pickups.
3 – This is a higher gain tone model in comparison to 2.
 
Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.